Honey Processing
- Refractometer9104  |  0.4 kg
test the water content of your honey with this refractometer.
Ready calibrated and equipped with Auto Temperature Compensation (ATM). Simply smear a drop of honey on the prism and look through the eyepiece towards the light. You will see 3 scales. Read off the figure against the right hand scale where the light meets the dark, this is the percentage of water present in the honey. Ignore the other two scales.
Comes with calibrating oil, prism, pipette and a protection box made out of plastic
- Großes Doppelsieb mit Vertikalfilter9599  |  1 kg
- Ø ca. 24 cm
- Edelstahl rostfrei
- hohes Zylinder-Feinsieb mit starkem Innenkegel und außen mit umlaufendem Vertikalfilter, mit ausziehbaren Auflagebügeln, passend für Behälter bis 38 cm
- Grobsieb mit durchgehender Siebfläche
- Stainless Steel Double Strainer9601  |  1 kg
- Ø approx 240 mm
- made of stainless steel
- adjustable arms, fits buckets with a diameter up to 380 mm
- one coarse one fine sieve
- Stainless Steel Double Strainer Classic9602  |  1 kg
- Ø approx 240 mm
- made of stainless steel
- adjustable arms, fits buckets with a diameter up to 380 mm
- one coarse one fine sieve
- Stainless Steel Double Strainer Classic9603  |  1 kg
- Ø approx 240 mm
- made of stainless steel
- adjustable arms, fits buckets with a diameter up to 380 mm
- one coarse one fine sieve
- Kunststoff Doppelsieb9604  |  0.25 kg
- Ø ca. 24 cm
- lebensmittelechter Kunststoff
- rundes Grob- und Feinsieb mit festen Auflagebügeln, passend für Gefäße bis Ø 30,5 cm
- Conical Coarse Strainer9605  |  0.15 kg
comes with a strong stainless steel ring Ø 330 mm and fits the conical filter stand. Mesh Size 1,18 qmm
- Conical Strainer Coarse9608  |  0.15 kg
- Mesh Size 1,0 qm
- comes with a strong stainless steel ring
- Ø 330 mm and fits the conical filter stand
- Height approx. 340 mm
- Conical Strainer Fine9610  |  0.14 kg
comes with a strong stainless steel ring Ø 330 mm and fits the conical filter stand. Mesh Size 0,35 qm, Height 470 mm
- Conical Strainer Extra Fine9611  |  0.16 kg
- Mesh Size 1,0 qm
- comes with a strong stainless steel ring
- Ø 330 mm and fits the conical filter stand
- Height approx. 340 mm
- Conical Strainer Set with Ø 33 cm9613  |  0.6 kg
consisting of the following items
- Conical Strainer
- Conical Strainer Fine
- Conical Strainer Extra Fine
- Conical Filter Stand9615  |  0.6 kg
An essential item to use in conjunction with a conical filter. Ø 330 mm, Height 420 mm
This stand will hold the filter in place with its stainless rim allowing the honey to easily clear through. Once the honey levels out in the bucket the stand is designed to sit on the sides of a bucket with its groved feet holding it in place. This can then be left until all the honey has completely drained out, minimizing waste.
Price does not include the conical filter
- Stainless Steel Strainer "Piccolo"9632  |  0.22 kg
- Ø approx 240 mm
- made out of stainless steel
- 3 fixed arms, fits buckets with a diameter up to 380 mm
Price does not include the bucket
- Stainless Steel Strainer "Grande"9634  |  0.51 kg
- Ø approx 360 m
- made out of stainless steel
- 3 fixed arms, fits buckets with a diameter up to 540 mm
Price does not include the bucket
- Honigrührer Rasant II9759  |  0.9 kg
aus Edelstahl, mit Spezialrührflügel von Ø 12 cm für hohe Scherkräfte. Mit zusätzlichem, rundem Kantenschutz mit Sechskantschliff am Ende
Edelstahlwelle mit Ø 12 mm. Länge 60 cm, Gewicht ca. 0,7 kg.
- Mixing Propeller9760  |  1.2 kg
- made out of Stainless Steel
- diameter of 100mm
- 10mm chuck
- 600mm long
- Honigrührer Rasant9762  |  0.65 kg
aus Edelstahl mit Spezialrührflügel von 9 cm Durchmesser für hohe Scherkräfte. Runde Edelstahlwelle Ø 10 mm mit Sechskantschliff am Ende
Gesamtlänge 60 cm, Gewicht ca. 0,6 kg
- Spiral Mixer9766  |  0.84 kg
- made out of stainless steel.
- 10 mm shaft
- 650mm long with a 75mm diameter spiral
- Brightly polished
- Spiral Mixer9771  |  0.99 kg
- made out of stainless steel.
- 10 mm shaft
- 650mm long with a 75mm diameter spiral
- Brightly polished
- Rührpropeller mit Kantenschutz9772  |  1.1 kggefertigt aus Edelstahl mit zwei beweglichen und eingefassten Rührflügeln mit Ø 110 mm sowie 60cm langem Sechskantstab. Die Einfassung der Rührflügel verhindert es sich Späne in den Honig zu rühren sollte der Kunststoffeimer mit dem Rührer berührt werden.
- Adapter M149786  |  0.1 kgAdapter mit 2 Gewindegängen M14 zum Aufschrauben und Feingewinde passend für das Bohrfutter (Art.Nr. 9788)
Der Adapter in Kombination mit dem Bohrfutter (Art.Nr. 9788) kann dazu verwendet werden um Mörtelrüher zum Honigrühren zu verwenden. - Zahnkranzbohrfutter9788  |  0.3 kgDas Bohrfutter ist für Bohrer oder Stäbe von 1,5 bis 13 mm Durchmesser geeignet.
- Zahnkranzbohrfutter mit Adapter9795  |  0.5 kgMit Adapter M14 und Bohrfutterschlüssel
Zum Einschrauben in Mörtelrührer mit M14 Innengewinde. Das Bohrfutter ist für Bohrer oder Stäbe von 1,5 bis 13 mm Durchmesser geeignet. Ideal um alle Honigrührer einzuspannen.